Content missing
Gloworm Alpha PLUS (G1.0) RF
1200 LumensNZD$240.00
The all new Gloworm Alpha. 1200 Lumens | 69g | 4HR Runtime – setting the new benchmark for affordable night riding.
In stock (can be backordered)
- Description
- Specs
- What's Included
- Returns & Refunds
The all new Gloworm Alpha! This small form 1200 Lumen light sets the benchmark for quality, lightweight and affordable night riding like no other. Weighing in at a meager 69g (light only) and with the smallest footprint of the Gloworm range, the Gloworm Alpha PLUS is the perfect option helmet and handlebar mounting.
The Alpha PLUS comes with a larger 4-cell 6800mAh battery, as opposed to the 2-cell 3400mAh found with the Alpha, giving you a bit more juice in the tank.
Now with Wireless TX Remote – The Gloworm Alpha now supports our revolutionary Wireless TX (RF) Remote.
NOTE – G1.0 lights are not compatible with G2.0 batteries
Customise Your Light Output – IMT (Intelligent Mode Technology)
IMT defines the Gloworm ethos of versatility. IMT provides the freedom to use the Gloworm light in the default settings or to completely customise for ultimate personalisation.
IMT defines the Gloworm ethos of versatility. IMT provides the freedom to use the Gloworm light in the default settings or to completely customise for ultimate personalisation.
Default Settings
Trail – Low / Medium / High. Special mode: Super Dim
Commute – Low / High. Special mode: Flash (1 Flash every 2 seconds – Flash pattern is High/Low/High)Special modes are activated by holding down the button for 2 sec. This allows the user to conduct any outdoor activity without having to cycle through the special mode and having an interruption of a steady light beam. Additionally, the Alpha is shut down by holding the button for appx 5sec. IMT gives you the flexibility of refined programmes and modes without needing to access them every time you go from High mode back to low.
Trail – Low / Medium / High. Special mode: Super Dim
Commute – Low / High. Special mode: Flash (1 Flash every 2 seconds – Flash pattern is High/Low/High)Special modes are activated by holding down the button for 2 sec. This allows the user to conduct any outdoor activity without having to cycle through the special mode and having an interruption of a steady light beam. Additionally, the Alpha is shut down by holding the button for appx 5sec. IMT gives you the flexibility of refined programmes and modes without needing to access them every time you go from High mode back to low.
- 1200 Lumens
- 4HR run time on max brightness
- IMT Technology
- 2 X Cree XP-G3 LEDS
- H.F.C – High flex cable design
- Light Head Assembly only 69 grams
- Waterproof (IP66)
- 6.8 AHr Lithium Ion Battery (with charging/charged indicators)
- 2 Optic system (Spot/Spot) and (Spot/Wide)
- Wireless TX Remote compatible
- Alpha Light Head
- 6800mAh Lithium Ion 4-cell Battery
- Lithium Ion Battery Smart Charger
- Extension Cable
- 31.8mm Quick Release Handlebar Mount
- Universal QR Helmet Mount
- Universal Light Mount
- Spare Optic (Spot/Wide)
- Hex Tool (3mm/1.5mm)
- Spares Bag
- TX (RF) Remote (G1.0)
We would like our customers to be satisfied with purchases they make with Gloworm. If you are not satisfied with your purchase, we welcome your return or exchange product(s) within 14 days of the original order date as long as the following criteria are met:
Returns Policy
- the products were purchased from Gloworm website or associated retailer
- the products are new and unused with no signs of wear or use.
- the item(s) has not been disassembled.
- a copy of the original invoice is provided.
- exchanges are to be returned at the customer’s own expense.
We will notify you as soon as we receive the product and will provide you with a refund within 10 days. Additionally we will also refund your shipping costs. Please email us for further details.
If you wish to cancel your order after payment, please contact us via email or phone to discuss.
Engineered in NZ
All Gloworm Products are designed in NZ to precise engineering standards. Following the design process, products are assembled in our own facility with components sourced from partner companies. Bruce Davey co-ordinates the design process in New Zealand, while the manufacturing of Gloworm Products is managed by Gloworm Co-owner Vaggelis Monogyios.
Water Resistant
As Gloworm Products have been created to withstand the rigours of a harsh NZ outdoor environment. X-Series (X2, XS, XSV) lights are rated to IP67, meaning they can be submersed for up to 30 minutes in 1 meter of water (including the battery) whilst the CX is rated to IP65 and is therefore able to withstand jets of water from all directions.
Shockproof
Gloworm Products are built tough with few moving parts. We use durable materials such as aluminium, carbon fibre and polycarbonate to create a tough and robust product. Our lights can withstand a significant drop to a very hard surface, whilst our batteries are a little less robust and can take a drop from 2 meters without suffering considerable damage.
User Customisable
Whilst we could not programme our light level brightness to suit all users, we did make it possible to customise brightness levels to suit your needs. With the use of the Gloworm Link App or a few clicks of the button you can change the default light level brightness to better suit your next adventure or race day requirements. This function is great if you want to conserve your battery by limiting your maximum brightness.
Self Protection
LED lights produce heat and are sensitive to excessive power. Without built in protection these characteristics can cause damage to a light. To ensure our lights withstand the test of time they all feature self-protection features that limit overheating of the electronics, overcharging of the batteries and excessive discharging. As a rider, you would never know this is occurring, however the light itself will constantly check temperature and power in an effort to make your experience the best possible.
Remote
The Gloworm XSV, XS, X2 and Alpha feature Wireless remote control support. The TX allows you the control of your light remotely and most importantly function without needing to remove your hands from the bar. The TX can be used to control one or many lights either independently or synchronised. Once paired to a specific light or lights the TX cannot accidently control another Gloworm. Please note: G1.0 lights can’t be controlled by G2.0 remotes and vice versa.
Universal Mounting
All Gloworm Products are compatible/include the Universal Mounting System. The system allows the use of the same mounting system across the range of lights, meaning you can use the same mount for different lights. The Universal Mounting System is also compatible with other common adventure product mounting systems.
CNC Machined (Not Alpha)
The Gloworm XS, XSV and X2 are manufactured using a process called CNC machining. This involves cutting the shape of the light from a single block of aluminium using a computer-directed cutter in a controlled engineering environment. The process is relatively slow but very accurate and is common in the manufacturing of high end products. The Alpha units are cast from 6 series aluminium and then have the finer details machined post casting.
Mounting Versatility
The Gloworm Universal Mounting System provides unrivalled flexibility, allowing your light to be mounted to the helmet, bike or even headstrap.
Quality Engineering
From housing to circuitry Gloworm lights are carefully engineered from quality components.
Customisable Light Pattern
Stainless Steel Hardware
Waterproof Tested
Fatigue Resistant Cable
User Defined Light Mode
Precision Engineering
Wireless Control
Leading Electronic Components
Customisable Light Pattern
Each Gloworm light features optics that can be changed to suit the preferences of the rider. Depending on the intended, changing the optics in a light can greatly improve the overall user experience. For extra convenience, each light set features a selection of optics/alternative optics.
Stainless Steel Hardware
We understand that Gloworm lights are designed to be used in the outdoors and exposed to the elements. That’s why we fit each light with high quality stainless steel hardware (bolts and screws). This means your light is going to keep looking good for years to come.
Waterproof Tested
Gloworm lights are designed for the most extreme conditions. When it comes to water resistance, we design and test our products to comply to recognised IP (Ingress Protection) standards. Our lights are so well sealed that they can be exposed to continuous rain or even submersed (not the Gloworm CX). We designed them this way to ensure they could take whatever was thrown at them on almost any bicycle ride. The X-Series are tested to IP67 – meaning they can safely be submersed to 1 meter for up to 30 minutes. The CX is tested to IP65 – meaning it can handle water jets from any angle (when the USB cover is closed).
Fatigue Resistant Cable
The cables used on Gloworm Lights have been developed in conjunction with a specialist cable manufacturer. Cables on electronic equipment are an inherent weak point – so we created our cable to reduce this inherency and give your product a longer usable life. Paired with the fatigue resistant cable, are our new rubberized strain reliefs, designed to protect the cable as it enters the light. The combination of both components creates the perfect solution for cable protection in a high use outdoor environment.
User Defined Light Mode
Each Gloworm Light features the ability to customise the light levels. While our lights have default settings and are ready to go out of the box, they can also be modified to suit your individual needs. Default programming features Low, Medium and High light levels, however if this doesn’t work for you then it’s a relatively simple process to customise the light levels for your needs.
Precision Engineering
The Gloworm XS, XSV and X2 are manufactured using a process called CNC machining. This involves cutting the shape of the light from a single block of aluminium using a computer-directed cutter in a controlled engineering environment. The process is relatively slow but very accurate and is common in the manufacturing of high end products. The CX and Alpha use an engineering method called Casting. Casting requires a mould machined from steel. Molten aluminium is then introduced to the mould to form the basic shape of the product. Once the product is removed from the mould, CNC machining is used for areas that require a higher degree of accuracy. Casting is a faster process and therefore this is reflected in the price of the CX and Alpha.
Wireless Control
Our wireless button, the TX, is the ultimate in convenience. Using RF technology, a rider can control one or more lights from a single remote. Additionally, control can be independent (one button for each light) or synchronised – enabling control of one or both lights without the rider needing to lift their hands from the bar. Safety, Convenience and Efficiency.
Leading Electronic Components
We source only the most reliable and well-known brands when it comes to electronic components. Although it sometimes comes at a premium this is far outweighed by the reliability of a reputable company. Our lights are packed with high performance components – LEDs, resistors, capacitors, integrated circuits and inductors. Each from reputable brands such as Cree, Microchip and Texas Components, just to name a few.
Custom Optics
Swap and change your lenses to customise a beam pattern that fits your needs.
Spot Optic (All Lights)
96% Efficient/FWHM 17 degrees
The spot optic provides the narrowest beam. It is also the most efficient, allowing the greatest light output. It can be used in conjunction with another spot optic to gain the greatest possible output and therefore beam distance. This configuration is best used on the helmet to see down the trail or to spot the exit of a turn. Alternatively the spot could be paired with another optic type from an alternative light pattern.
Wide Optic (All Lights)
87% Efficient/FWHM 40 degrees
This optic provides a wide rectangular beam, it utilises the light output to provide more peripheral light and less light in the vertical axis. While not as optically efficient as the Spot Optic, it provides very good output for a wide-angle optic. Two wide optics can be paired as a great option for use on the road, however when paired with either a flood or spot optic an effective hybrid beam can be created.
Flood Optic (G1.0 - XS, X2)
84% Efficient/FWHM 25 degrees
For a smooth diffused light pattern the Flood optic is the best option. It takes the light and smooths it across the width of the beam, making it slightly easier on the eye and creating even light from left to right. A pair of Flood optics would provide a wall of smooth light, however in doing so a significant amount of light intensity would be lost compared to a pair of spot optics. The flood is best used in tandem with a spot or wide optic.
Honeycomb Optic (G2.0 XSV, XS, X2)
87% Efficient/FWHM 30 degrees
Designed for use with the XSV, the Honeycomb Optic is used to gain a smooth diffused light pattern when used with 2 spot optics or other honeycomb optics. It takes the light and smooths it across the width of the beam, making it slightly easier on the eye and creating a more even transition from the bright beam centre.